PERBAIKAN KUALITAS PRODUK MENGGUNAKAN METODE QUALITY CONTROL CIRCLE (QCC) DI PT. PUDAK ORIENTAL INDONESIA
DOI:
https://doi.org/10.32897/sobat.2023.5.0.3108Abstract
PT. Pudak Oriental Indonesia is one of the companies that emphasize the importance of product quality. The common issue faced in the quality inspection process is the presence of numerous defective products that fail quality testing. The objective of this research is to identify the types of defects that frequently occur, identify their root causes, and reduce the defect rate using the Quality Control Circle (QCC) method, employing PDCA (Plan, Do, Check, Act), and Control Charts. QCC is a method aimed at reducing defects and improving product quality. The research findings indicate that the most frequent type of defect is white body defects, with a total of 309 pieces. The root cause analysis reveals that the most influential factors are human error and material factors. The results of the quality improvement implementation initially started at 18% and have reduced to 11%. Specifically for the white body defect type, after the defect mitigation efforts, the defect rate has been reduced from the initial 309 pieces to 54 pieces.References
Yohanto R. Proses Produksi Dan Pengendalian Kualitas Dengan Metode QCC Di PT. Selaras Citra Nusantara Perkasa. Jakarta; 2018.
Walujo DA, Koesjati T, Utomo Y. Pengendalian Kualitas. Walujo DA, editor. Surabaya: Scopindo Media Pustaka; 2020.
Nurkholiq OA, Saryono O, Setiawan I, Fungsional J, Kepala L, Ahli A. Analisis Pengendalian Kualitas (Quality Control) Dalam Meningkatkan Kualitas Produk. 2019.
Rosdiana D, Purba HH. Literatur Review Penerapan QCC Dalam Industri. 2021.
Sirine H, Kurniawati EP, Pengajar S, Ekonomika F, Bisnis D, Salatiga U. Pengendalian Kualitas Menggunakan Metode Six Sigma (Studi Kasus pada PT Diras Concept Sukoharjo) [Internet]. Vol. 02, AJIE-Asian Journal of Innovation and Entrepreneurship. 2017.
Fikri Baisalim M, Soediantono D, Staf dan Komando TNI Angkatan Laut S. Literature Review of Quality Control Circle (QCC) and Implementation Recommendation to the Defense Industries [Internet]. Vol. 3, Journal of Industrial Engineering & Management Research. 2022.
Haryadi. Analisa Pengendalian Kualitas untuk Mengurangi Jumlah Cacat Produk Dari Proses Cutting dengan Metode Quality Control Circle (QCC) Pada PT. Toyota Boshoku Indonesia (TBINA). Jakarta; 2018.
Kementrian Perindustrian. Gugus Kendali Mutu (GKM). Jakarta; 2007.
Muhamad sayuti. Analisis_Pengendalian_Kualitas_Produk_Pa. IndustryXplore. 2018 Oct;3:46–60.
Rachman T. Pengantar Teknik Industri. 2014.