PEMANFAATAN ABU SEKAM SEBAGAI FILLER PADA AGREGAT HALUS TERHADAP KUAT TEKAN BETON PADA UJI LABORATORIUM
DOI:
https://doi.org/10.32897/simteks.v1i1.804Keywords:
Pasir, Campuran, BetonAbstract
Sekam padi adalah salah satu bentuk limbah pertanian yang masih sering kita jumpai di daerah persawahan. Namun limbah sekam padi masih dinilai berdaya guna rendah. Pada penelitian ini digunakan abu sekam variasi subsitusi pada agregat halus dalam campuran beton yaitu sebesar 20%, 40%, dan 50%. Dengan pengujian yang dilakukan berupa slump test (uji slump) dan uji kuat tekan beton pada umur 7 hari dan 14 hari. Hasil dari uji kuat tekan penelitian ini, nilai kuat tekan tertinggi diperoleh dari beton dengan agregat halus tersubsitusi abu sekam 20% pada umur beton 14 hari yaitu mencapai 10,70 MPa. Sedangkan hasil uji tekan beton terendah dari beton tersubsitusi abu sekam 50% pada umur 7 hari yaitu mencapai 0,92 MPa.References
T. Mulyono, Teknologi Beton. 2003.
F. S. Ridwan, “Analisis Pengaruh Pemanfaatan Abu Sekam Sebagai Filler Pada Campuran Aspal Beton,” Konstruksia, 2017.
A. Dumyati and D. F. Manalu, “Analisis Penggunaan Pasir Pantai Sampur Sebagai Agregat Halus Terhadap Kuat Tekan Beton,” Jurnal, 2015.
Badan Standardisasi Nasional, “SNI 03-1968-1990 Metode Pengujian Tentang Analisis Saringan Agregat Halus dan Kasar,” Badan Standar Nas. Indones., 1990.
SNI1974-2011, “Cara Uji Kuat Tekan Beton dengan Benda Uji Silinder,” Badan Stand. Nas. Indones., 2011.
A. Norhadi, S. Surat, M. Fauzi, A. A. Ramadhani, and D. Rachman, “PERMODELAN MODIFIKASI ALAT PEMADATAN DI LABORATORIUM SESUAI DENGAN SNI SNI 1743:2008,” J. Gradasi Tek. Sipil, 2020, doi: 10.31961/gradasi.v4i1.813.
Downloads
Published
Issue
Section
License
Authors who publish their articles in SIMTEKS agree to the following terms:
(1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 Internasional (CC BY-SA 4.0) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
(2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
(3) The author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See The Effect of Open Access).
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.