KAJIAN BETON POLIMER MENGGUNAKAN SERAT FIBER BENDRAT DENGAN VARIABEL L/D TERHADAP JUMLAH VARIAN KADAR SEBAGAI KETAHANAN KUAT TEKAN BETON
DOI:
https://doi.org/10.32897/simteks.v2i2.1240Keywords:
Beton Polimer, Kuat Tekan, Kawat Bendrat, Resin Epoxy, HardenerAbstract
Pengujian kuat tekan beton polimer bendrat 0.25%, 0,5%, 0,75%, 1%, 1,5%, 2% dan 2,5% berada terhadap rancangan benda uji yang terdiri dari tiga campuran dalam variabel masing masing bendrat berukuran 30 mm, 40 mm, 50 mm berdasarkan L/d yaitu menjadi 3 cm, 4 cm, 5 cm dan berdiameter 1 mm pada benda uji berbentuk kubus 15x15x15 cm. Pengujian dilakukan pada umur beton 1 hari. Hasil nilai kuat tekan mutu beton spesimen BPB0.25, BPB0.251: 21,4Mpa, BPB0.252: 21,4Mpa, BPB 0.253: 21,6Mpa dan BPB0.50, BPB0.501: 21,6Mpa, BPB0.502: 21,8Mpa, BPB0.503: 22,3Mpa dan BPB 0.75, BPB0.751: 22,7 Mpa, BPB0.752: 23,1Mpa, BPB0.753: 23,1Mpa dan BPB1, BPB11: 22,7Mpa, BPB12: 23,1Mpa, BPB13: 23,43Mpa dan BPB1.50, BPB1.501: 22,4Mpa, BPB1.502: 23,5Mpa, BPB1.503: 23,9Mpa, BPB2, BPB21: 24Mpa, BPB22: 24,2 Mpa, BPB23: 24,6Mpa dan BPB2.50, BPB2.501: 24,8Mpa, BPB2.502: 24,9 Mpa, BPB2.503: 25,3Mpa. Perbandingan spesimen dengan kadar varian yang berbeda mengalami trend kecendrungan menngkat namun tidak signifikat dikarenakan perbedaan variabel kadar serat kawat bendrat yang berbeda dan juga pada saat pengerjaan metode agak berbeda.
References
A. Kusumawanto And Z. B. Astuti, Arsitektur Hijau Dalam Inovasi Kota. Ugm Press, 2018.
P. R. Mulia, “Pengaruh Penambahan Serat Kawat Bendrat Pada
Daerah Tarik Terhadap Kuat Lentur Beton,” 2007.
R. Tambunan And M. Ryanto, “Kajian Kuat Tekan Beton Polimer Dengan Campuran Dua Tipe Komposisi Agregat Kasar,” In Prosiding Sobat (Seminar Sosial Politik, Bisnis, Akuntansi Dan Teknik) Universitas Sangga Buana Ypkp, 2019, Vol. 1, No. 1, Pp. 94–100.
A. Maghfirah, H. Meilanda, E. Marlianto, And M. Iskandar, “Pemanfaatan Serat Cangkang Kulit Kopi Dalam Pembuatan Beton Polimer Dengan Resin Polyester Sebagai Perekat,” J. Ilmu Fis. Dan Teknol, Vol. 3, No. 2, Pp. 51–61, 2019.
D. Pradana, “Pengaruh Penggunaan Zat Epoxy Terhadap Kuat
Tekan Beton Normal.” Univesitas Komputer Indonesia, 2020.
N. Najamudin, “Pengaruh Ukuran Partikel Terhadap Sifat Mekanik
Komposit Dengan Matrik Resin Epoxy,” Penelit. Mandiri Univ. Bandar
Lampung, 2017.
M. F. Taures, “Pengaruh Perlakuan Alkali (Naoh) Pada Permukaan Serat Sisal Terhadap Peningkatan Kekuatan Ikatan Interface Komposit Serat Sisal-Epoxy,” 2018.
Y. A. Kamaludin, Cara Cepat Menghitung Kebutuhan Material. Transmedia, 2009.
P. P. Utomo, “Analisis Perbandingan Biaya Dan Waktu Pelaksanaan Pekerjaan Dinding Eksterior Menggunakan Dinding Beton Pracetak Dan Dinding Panel Beton Ringan Pada Proyek Apartemen Gunawangsa Merr Surabaya,” Diss. Inst. Teknol. Sepuluh Nop., 2017.
F. M. Mutahari, “Uji Laboratorium Untuk Variasi Perbandingan Semen Terkait Kebutuhan Beton Kedap Air Pada Bangunan Reservoir Dari Campuran 2: 2: 3-2, 5: 2: 3-2, 75: 2: 3.” Universitas Sangga Buana Ypkp Bandung, 2019.
Downloads
Published
Issue
Section
License
Authors who publish their articles in SIMTEKS agree to the following terms:
(1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 Internasional (CC BY-SA 4.0) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
(2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
(3) The author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See The Effect of Open Access).
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.