Pengaruh Nano Silika Terhadap Nilai Karakteristik Aspal Pen 60/70
Article Sidebar
Nano Silika,
karakteristik,
Perkerasan Jalan Pen 60/70 Asphalt,
Nano Silica,
Characteristics,
Pavement
Main Article Content
Abstract
Roads are very important because they help the economy of a region grow. Many roads are still poorly designed and constructed, especially in Indonesia. One way to improve the quality of asphalt is to add additives. One material that could make asphalt more valuable and be used as an additive is nanomaterial. This test was done to learn about pen 60/70 asphalt with 2% and 4% nano silica additives. The test uses an experimental research method. It involves testing in the laboratory. The results of testing pen 60/70 asphalt with 2% and 4% nano silica additives showed an increase in values for penetration, softening point, flash point, viscosity, and specific gravity, and a decrease in values for ductility, solubility, and oil weight loss (TFOT).
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.References
Prihatini E, Rusnardi Rahmat Putra. Kata Kunci: Nanomaterial, Abu Sekam Padi, Mortar, Kuat Tekan. 2021;8(3):175–84.
Katsuki H, Furuta S, Watari T, Komarneni S. Zsm-5 Zeolite/Porous Carbon Composite: Conventional- And Microwave-Hydrothermal Synthesis From Carbonized Rice Husk. Microporous Mesoporous Mater. 2005 Nov 1;86:145–51.
Yao H, You Z, Li L, Lee Ch, Wingard D, Yap Yk, Et Al. Rheological Properties And Chemical Bonding Of Asphalt Modified With Nanosilica. J Mater Civ Eng. 2013;25(11):1619–30.
Wahyudi A, Amalia D. Prepapration Of Nano Silica From Silica Sand Through Alkali Fusion Process. Indones Min J. 2013;16(3):149–53.
Sukirman S. Beton Aspal Campuran Panas. 2016. 167 P.
Direktorat Jenderal Bina Marga. Spesifikasi Umum Bina Marga Tahun 2018 (Revisi 2) Untuk Pekerjaan Konstruksi Jalan Dan Jembatan. Edaran Dirjen Bina Marga Nomor 02/Se/Db/2018. 2018;(Revisi 2):1–1036.
Kalapathy U, Proctor A, Shultz J. A Simple Method For Production Of Pure Silica From Rice Hull Ash. Bioresour Technol [Internet]. 2000;73(3):257–62. Available From: Https://Www.Sciencedirect.Com/Science/Article/Pii/S0960852499001273
Crucho J, Neves J, Capitão S, Picado Santos L. Mechanical Performance Of Asphalt Concrete Modified With Nanoparticles: Nanosilica, Zero-Valent Iron And Nanoclay. Constr Build Mater. 2018 Aug 30;181:309–18.
Resentia Nk. Pengaruh Penambahan Nano Silika Terhadap Volumetrik Dengan Metode Pemadatan Marshall Dan Superpave Pada Campuran Beraspal Ac - Wc. Fak Tek Jur Tek Sipil Dan Lingkung Inst Teknol Bandung. 2023;30(1):71–8.
Hamsi S, Sipil Jt, Teknik F, Mataram U. Analisis Kinerja Asphalt Concrete Binder Course ( Ac-Bc ) Menggunakan Aspal Modifikasi Gondorukem Analisis Kinerja Asphalt Concrete Binder Course ( Ac-Bc ). 2025;
Badan Standardisasi Nasional. Sni 2432 Cara Uji Penetrasi Aspal. 2011.
Nasional Bs. Sni 2434 Cara Uji Titik Lembek Aspal Dengan Alat Cincin Dan Bola (Ring And Ball). 2011.
Nasional Bs. Sni 2432 Cara Uji Daktilitas Aspal. 2011.
Badan Standardisasi Nasional. Sni 2433 Cara Uji Titik Nyala Dan Titik Bakar Aspal Dengan Alat Cleveland Open Up. Badan Stand Nas [Internet]. 2011;1–18. Available From: Www.Bsn.Go.Id
Sni 7729:2011. Sni 7729:2011 Cara Uji Viskositas Aspal Pada Temperatur Tinggi Dengan Alat Saybolt Furol. Jakarta Badan Stand Nas. 2011;
Badan Standardisasi Nasional. Sni 2441 Cara Uji Berat Jenis Aspal Keras. Badan Stand Nas. 2011;
Badan Standardisasi Nasional. Sni 2438: 2015 Cara Uji Kelarutan Aspal. Jakarta Badan Stand Nas [Internet]. 2015;1–13. Available From: Http://Sispk.Bsn.Go.Id/Sni/Detailsni/9874
Badan Standardisasi Nasional. Sni 06-2440-1991 Metode Pengujian Kehilangan Berat Minyak Dan Aspal Dengan Cara A. Sni 06-2440 1991. 1991;1–5.